Features

We are only human

By on

The impact that technology and data exchange is having on workplace safety is both fascinating and exciting, but what must we do to meet the inevitable challenges to come?


Commonly known as Industry 4.0,   the current trend of automation and data exchange in manufacturing technologies, is having an effect in the field of human factors and safety performance. Without doubt, there are major positives for safety, as better engineering tech helps keep workers out of harm’s way.

Already, there is smart personal protection equipment (PPE) that actively identifies hazards such as temperature changes, sudden movement or potentially concerning inactivity. Smart surveillance systems that use CCTV and PPE recognition software to ensure people are wearing what they should, where they should, also exist.  

Such ‘better, cheaper, safer, more reliable’ logic will also eventually apply to less-hazardous manual tasks for which automation has traditionally been unaffordable. There are clear long-term health benefits to be had too, with fewer incidents of harm due to repetitive work. It is possible as well that many of the most hazardous jobs will simply disappear. But, as we shall see below, this does not mean that we can lessen our efforts to increase safety; in fact, with new technology come new challenges that require a renewed focus on human factors. 

Speedy evolution – not true revolution

When it comes to job numbers, experts are divided on the long-term impact of automation. In the past, technological advances have ultimately increased the aggregate number of jobs in the economy, but with different kinds of jobs coming on stream.  

As Industry 4.0 comes to pass, people will clearly still be needed to design, build, install, run and maintain the new technologies; new industries will also appear that we have yet to imagine.  

However, most experts agree that, despite the faster rate of change, over the next 10 years or so we will not see a radical, overnight shift in the employment landscape. We will still need people to negotiate existing hazards and deal with the coming changes and hazards that the workplace of the future will bring.  

So, what will cause injuries in the future? The same things that cause injuries now. There are only three possible reasons why people get hurt. Either you do something that leads to your own injury (the most common), the ‘other guy’ does something that leads to you getting hurt, or a non-human event, such as equipment breaks or a hazard, occurs that leads to an incident.   

Very often, when people get hurt in the workplace it is during everyday activities such as walking, using the stairs, or encountering objects, other people or moving equipment/vehicles. These are eventualities that one cannot engineer out of existence or easily guard against. 

Companies typically reach a plateau at which doing more of what they have done in the past, the things that significantly reduced injuries over the longer term, loses some of its effectiveness. Technology may eventually move us beyond that plateau, but until we get to that stage of airbag-deploying workwear that senses a fall as it is happening, these types of injury will persist. 

Critical states of mind 

Why and when do people get hurt? For the vast majority, it is about states of mind or body such as rushing, being frustrated with a situation, being tired or fatigued or simply having done something so often for so long that we become complacent and go on autopilot. 

We are hardwired to function subconsciously the vast majority of the time. Thus, complacency becomes pervasive once we get used to doing something. Indeed, technology can even exacerbate complacency: if we rely only on technology to keep us safe, what happens when it fails or is absent?  

The four critical errors

From a safety point of view, we can simplify mistakes into four critical errors: eyes not on task; mind not on task; putting oneself in the line of fire or losing balance, traction and grip. These four errors account for over 90 per cent of all injuries — and a lot of other non-safety mistakes too. If we assume that there are a mere four errors in play and those errors are most likely to happen when we are in one of four states, the problem of reducing error becomes easier to tackle – and with it the chance to reduce injury levels.   

Error reduction and new skills

To reduce critical errors, therefore, we can ingrain new skills and habits that will account for these states and allow us to avoid making critical errors. Using the same types of neural pathway that make us go on autopilot, we can give our brains failsafe techniques for when we are most likely to make an injury-causing error.  

One of the first techniques we get people to practice is to observe those around them. If we see someone in one of the four states – rushing, frustrated, and looking tired or on autopilot – it helps us to bring ourselves into the moment, keep out of harm’s way and also reflect on our own actions.  

Another good technique is to reflect on the small mistakes that we make and look for a link to one of the four states. Such reflections can turn out to be hugely consequential. 

It is also possible to help people recognise when they are in one of the first three states: rushing, frustration and fatigue (combating complacency requires a different approach). The breakthrough comes when people learn to both amplify and listen to their own inner voice telling them that something feels wrong. We call this technique self-triggering, which is catching oneself in one of those states before an error or injury occurs. 

All this takes time and practice and will become, if anything, more relevant as technology’s impact grows and new equipment and industries become a reality. 

Whatever happens, the human factor will remain critical in Industry 4.0.  Alongside advancing engineering and technological solutions that address risk, we will always need to help people develop the personal safety skills that allow them to deal with the new world, whatever that ends up looking like. 

read our report on Future Risk at: britsafe.org/campaigns-policy/future-risk/report

David Hughes

Development director (UK, Ireland and Nordic countries) 

SafeStart 

FEATURES


Parked Lorry CLOCS

CLOCS: A national framework for safer construction logistics and community safety

By Andy Brooke, CLOCS on 04 November 2024

CLOCS is the national standard for ensuring the safest construction vehicle journeys, reducing risk to vulnerable road users, improving air quality and congestion, and driving operational efficiencies. By becoming a CLOCS Champion and adhering to the CLOCS Standard, key stakeholders involved in construction projects can help to prevent fatalities and injuries caused by construction traffic – both on the road and on-site.



Fleet Telematics Screens Applied Driving

Empowering driver management with fleet and video telematics innovation

By Queclink Wireless Solutions, SureCam, Applied Driving and Inseego UK Ltd on 04 November 2024

Fleet and video telematic systems are increasingly capable of generating huge amounts of data about driver behaviour, vehicle usage and external threats on the road, but time and resource are required to analyse the results to pinpoint driver behaviour that requires attention. However, the latest AI-powered tools and processes look set to transform how quickly and effectively the data can be analysed, according to a group of road safety technology experts.



Back of Van iStock RistoArnaudov

Driver risk management: what excellent looks like

By Driving for Better Business on 04 November 2024

In its second year of National Highways sponsoring the ‘best driver risk management performance’ category at the Safety & Health Excellence Awards, we take a look at this year’s winner and close contenders showing how it can be done.