A custom approach to hearing protection

By on

Our ears are intricate and extremely delicate instruments. Much like a person’s eyesight, once the hearing has been damaged, it cannot be reversed. It is vital, therefore, to protect hearing from the damaging, long-term effects of noise at work.

This may seem obvious, but our research, undertaken by Opinium on behalf of Specsavers Corporate Eyecare in February 2019 among more than 500 senior decision makers in UK businesses, reveals that one-third (34 per cent) of employees who require hearing protection for work purposes are not provided with it by their employer.

Noise levels

It is clear that avoiding loud noises and controlling noise levels is the best way to avoid damaging hearing. Hearing damage can start from around 85 decibels (dB) – that’s about the top end noise of a busy street, or the average lawn mower – if exposed to it for eight hours or more without hearing protection. After 85dB, for every noise increase of 3dB, the exposure time cuts in half. For example, it is only safe to be exposed to 88dB sound levels for up to four hours, 91dB for only two hours, and so on. By 112dB – about the volume of a leaf-blower or chainsaw – damage to hearing can occur in less than a minute.


Under the Noise at Work Regulations (2005), it is the responsibility of employers to protect their employees from exposure to excessive noise and noise-induced hearing loss. In our research, some employers themselves acknowledged that they are not providing the necessary hearing protection, and by failing to do so, they may be putting their employees’ hearing at risk.
The employer should undertake a noise assessment to determine the correct hearing protection required.

This will depend on several factors, including the level of noise and the amount of exposure an employee has to it. It is also the employee’s responsibility to make sure they use the hearing protection provided.

One-third of employees who need hearing protection for work purposes are not provided with it by their employer, found a survey

Instant fit

Advances in technology mean the latest generation of instant-fit devices are now more effective and comfortable than ever. They are reusable and often designed for use in specific environments, like swimming, sleeping and riding a motorbike. However, they are not necessarily the best option for occupational noise protection and are best reserved for occasional leisure and DIY use.

Custom fit

Custom-fit devices are aimed at providing protection at work or in more specialised environments. Produced from an impression taken of the ears, or from 3D scanning, custom-fit hearing protection provides an individual with comfortable fit and guaranteed levels of protection.

Made from soft, medical-grade silicone, the best custom hearing protection is hardwearing and the bespoke fit means employees can wear them for longer than standard ear plugs, with greater levels of protection and comfort. Specialised hearing protection products are designed to protect the ears but also allow important sounds, like voices, to be heard clearly.

Only a quarter of employers provide custom-fit hearing protection

Our survey also looked at the types of hearing protection offered:
• Overhead earmuff 42 per cent
• Foam earplug 37 per cent
• Custom-moulded earplug 26 per cent
• Ear canal caps 21 per cent
• Flanged earplug 20 per cent
• Integrated earmuff 18 per cent
• Banded earplug 17 per cent.

Custom-moulded ear plugs are generally accepted to be the most effective solution for hearing protection, yet these are provided by just a quarter (26 per cent) of employers. While it is good to see that at least some hearing protection is being offered, employers should consider whether what they have provided is adequate.

Avoidable loss

Poor hearing is not something that is inevitable with old age. Nor is loss of hearing something that only affects older people. There are many factors that contribute to hearing loss, the most common being exposure to noise. This may be as slight as working around computer printers or next to an air conditioner, depending upon the amount of time spent in the vicinity of the noise.

It is important, therefore, that employers consider all employees and working roles. Although employees using heavy machinery in a manufacturing environment may be the obvious candidates for hearing protection, low-level noise hazards must be kept in mind too.

Hearing loss can have a profound effect on those who are affected. It can make conversations difficult and lead to isolation. Hearing protection is not, therefore, a matter of health and safety alone, it is also hugely significant to the wellbeing of employees.

Government noise action plans: bit.ly/2R6N0Jl

Jim Lythgow is Director of strategic alliances, Specsavers Corporate Eyecare


EHS Berlin Istock Stevecoleimages

The case for doing safety differently

By EHS Congress Berlin on 10 February 2020

Over the past two decades, safety improvements across a number of industries have largely flatlined – as measured in fatalities and serious injury rates, for instance – despite a vast expansion of safety investment, compliance and paperwork.

Istock Boardroom Presenting Image By Peopleimages MED

Five secrets to a successful wellbeing strategy

By Belinda Liversedge on 29 January 2020

Need to convince the leaders in your organisation to take wellbeing seriously? “Don’t just appeal to the money, appeal to the strategy,” says Professor Kevin Daniels

Australia Fires 23 0.A Satellite Image Of The Batemans Bay Showing Smoke And Fire From Wild Bushfires

Every little helps

By Iris Cepero on 28 January 2020

We are in a climate crisis; it is the clear and final message we have got now. Under that frightening premise we start a new year and a new decade.